What to Do When Your Freezer Is Not Freezing—10 Straightforward Fixes to Attempt

A freezer that’s not freezing can shortly lead to spoiled mealsinflicting a severe mess and a severe expense. In case you uncover your freezer is struggling to freeze objects, act now sooner than it’s too late. Some freezer factors are simple, like a blocked evaporator fan, and others are additional difficult, similar to faulty elements. The optimum temperature of a freezer is 0 ranges Fahrenheit.

In case your freezer is struggling to sit back proper right down to zero ranges, listed under are some potential freezer points and choices.

10 Causes Why Your Freezer Is Not Freezing and Choices

Want additional dwelling reno problem recommendations and inspiration? Be a part of our free daily e-newsletter for the newest how-tos, reno guides, and additional!

Unsuitable Settings

One of many essential widespread causes that freezers battle to freeze objects is that the freezer temperature or one different setting is prepared improperly.

Decision: Regulate Settings

Regulate your freezer’s settings, following the producer’s instructions for the suitable settings. Many freezers have a advisable temperature setting, nonetheless chances are high you may uncover that you just select a colder setting for positive meals storage needs.

Unhealthy Door Seal

Even when your freezer is functionally sound, a foul door seal will shortly set off factors that will stop your freezer from freezing meals.

Decision: Clear or Alternate Door Seal

In case your freezer’s door seal is compromised, similar to falling off, ripped, or in some other case damaged, you’ll attainable should purchase and arrange a model new one. Nonetheless, it might merely should be cleaned. Take away any buildup of grime or frost on every the door seal and the freezer.

Dirty Condenser Coils

Your freezer’s condenser coils are usually positioned on the once more near the underside, though the exact place would possibly fluctuate from model to model. As a result of exterior location, condenser coils are prone to getting dirty and clogged with mud and completely different particles. As quickly as clogged, your freezer can battle to sit back down appropriately, leading to meals not being frozen.

Decision: Clear Coils

Make a conduct of often checking your freezer’s condenser coil and cleaning off mud sooner than an extreme quantity of accumulates.

To clean the coils, adjust to these steps:

1. Unplug the freezer.
2. Take away any exterior covers.
3. Use a vacuum and a fragile bristle brush to remove the mud from the coils, being cautious to not dent or bend the coils.
4. Alternate the covers and plug inside the freezer.

Frost Buildup

Moisture in chest-type or upright freezers will shortly freeze, leading to frost buildup on meals, alongside the door seal, and spherical prone freezer elements. Whereas a little bit bit frost in your meals just isn’t a severe deal, an extreme quantity of frost inside the flawed spot can protect a freezer from cooling down.

Decision: Run Defrost Cycle

Freezers are designed to often defrost, stopping frost from improve and inflicting factors. Nonetheless, sometimes that’s not enough to keep up the frost at bay. That’s when it is best to run a pressured defrost cycle. Observe your producer’s instructions on simple strategies to place your explicit freezer in defrost mode.

Defrosting Factors

Usually the explanation for the frost is a matter with the defrost carry out of the freezer, which suggests you presumably cannot even take away it by working a pressured defrost cycle.

Decision: Manually Defrost Freezer

In case your freezer’s defrost carry out just isn’t working, it is vital to manually defrost the freezer by unplugging it until the frost melts, then eradicating any water sooner than turning it once more on. You’ll attainable wish to place your meals in a single different freezer or cooler inside the meantime.

Faulty Thermistor

A freezer’s thermistor is among the many most vital elements for the cooling cycle. It shows the freezer’s temperature and tells the compressor when to activate and off to sit back it down, very like a thermostat’s relationship with an HVAC system. If the thermistor breaks, the freezer will not cool appropriately.

Decision: Alternate the Thermistor

Happily, freezer thermistors are usually low-cost and relatively easy to change.

To alternate your freezer’s thermistor, adjust to these steps:

1. Unplug the freezer.
2. Take away any essential cupboards and covers.
3. Discover the thermistor. It’s normally beneath a plastic cowl on the wall or ceiling of the freezer.
4. Take away the thermistor by disconnecting any {{hardware}} and wires.
5. Arrange the model new thermistor.
6. Alternate any covers and cupboards.
7. Plug inside the freezer.

Broken Evaporator Fan

A freezer’s evaporator fan circulates the cool air all via the freezer. If the evaporator fan goes out, the freezer will not cool appropriately.

Decision: Alternate Evaporator Fan

Evaporator followers are considered one of many greatest elements to change on most freezer fashions.

To alternate a freezer evaporator fan, adjust to these steps:

1. Unplug the freezer.
2. Take away any cupboards and covers.
3. Unplug the evaporator fan.
4. Take away any essential clips or screws.
5. Take away the broken evaporator fan.
6. Arrange the model new evaporator fan and plug it in.
7. Alternate any covers and cupboards.
8. Plug inside the freezer.

Blocked Evaporator Fan

Usually, the evaporator is working, nonetheless its airflow is blocked by meals, stopping the cool air from circulating inside the freezer.

Decision: Switch Blockage

Take away any blockage from the evaporator fan so it might presumably increased stream into the chilly air.

Faulty Start Relay

A freezer’s start relay works along with the thermistor to engage the compressor. When the thermistor senses that the freezer needs to begin a cooling cycle, the start relay turns the compressor on. An identical to a foul thermistor, a faulty start relay would possibly lead you to think about your freezer has a foul compressor.

Decision: Alternate Start Relay

Happily, it’s easier and cheaper to change a freezer’s start relay than its compressor. That is simple strategies to do it:

1. Unplug the freezer.
2. Take away any covers to entry the start relay.
3. Pull off any clips holding the start relay to the compressor.
4. Disconnect the wiring harness from the start relay.
5. Take away the start relay.
6. Switch the run capacitor from the faulty start relay to the model new start relay.
7. Arrange the model new start relay and plug inside the wiring harness.
8. Alternate the quilt and plug inside the freezer.

Overloaded Freezer

Inserting an extreme quantity of meals or meals that’s too tightly packed can compromise your freezer’s potential to stream into the chilly air important to protect meals frozen. This could result in warmth spots inside the freezer.

Decision: Take away Some Devices

Take away objects until the freezer is barely 3/4 full. Put together the objects to promote increased airflow so the freezer can distribute chilly air all via the within.

Tips to Protect a Chilly and Working Freezer

Listed below are some recommendations for retaining your freezer chilly and functioning appropriately.

• Don’t overfill it. Filling your freezer larger than 75% full can forestall chilly air from efficiently circulating all via.
• Fill it strategically. Even in case you don’t overfill your freezer, you presumably can compromise the airflow by blocking the evaporator fan. Arrange your freezer to keep up the evaporator clear and promote airflow.
• Maintain the door seal clear. Make a conduct of often checking your freezer’s door seal to ensure it’s free of particles and shutting completely.
• Maintain the condenser coil clear. Make a conduct of checking the condenser coil as quickly as a month and eradicating any mud accumulation.
• Perform a handbook defrost when essential. In case you begin to be aware frost buildup, perform a handbook defrost sooner than it’s going to get out of hand and begins to set off factors.
• Optimize your freezer’s settings. In case you’ve got not at all adjusted the settings, you presumably will be hindering your freezer’s potential. Furthermore, flawed settings can run your utility bill up unnecessarily.